Pressure Sensors
Pressure sensors are essential parts of many industrial applications since they are the foundation for system pressure monitoring and control. These gadgets transform mechanical pressure into an electrical signal that can be tracked and quantified. In a variety of industries, such as oil and gas, chemical processing, pharmaceuticals, food and beverage, and manufacturing, this functionality is essential for preserving ideal working conditions, guaranteeing safety, and increasing productivity. At Aventum we are leaders in pressure management, providing a comprehensive range of pressure sensors and pressure gauges designed to meet demanding requirements.
-
PBS2-CB2X5SG1SSDQ5A0Z Pressure Sensor, -1 bar … 1.5 bar, -14,5 psi … 22 psi, PNP/NPN + 4 mA … 20 mA (6074224)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-CB4X0SG1SSDQ5A0Z Pressure Sensor, -1 bar … 3 bar, -14,5 psi … 44 psi, PNP/NPN + 4 mA … 20 mA (6074225)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-CB6X0SG1SSDQ5A0Z Pressure Sensor, -1 bar … 5 bar, -14,5 psi … 73 psi, PNP/NPN + 4 mA … 20 mA (6074226)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-CB010SG1SSDQ5A0Z Pressure Sensor, -1 bar … 9 bar, -14,5 psi … 131 psi, PNP/NPN + 4 mA … 20 mA (6074227)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-CB016SG1SSDQ5A0Z Pressure Sensor, -1 bar … 15 bar, -14,5 psi … 218 psi, PNP/NPN + 4 mA … 20 mA (6074228)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-CB025SG1SSDQ5A0Z Pressure Sensor, -1 bar … 24 bar, -14,5 psi … 348 psi, PNP/NPN + 4 mA … 20 mA (6074229)
$765.20 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB250SG1MSDNMA0Z Pressure Sensor, 0 bar … 250 bar, 0 psi … 3626 psi, PNP/NPN + 4 mA … 20 mA (6077515)
$763.15 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB400SG1MSDNMA0Z Pressure Sensor, 0 bar … 400 bar, 0 psi … 5802 psi, PNP/NPN + 4 mA … 20 mA (6077516)
$763.15 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB250SG1NSDLMA0Z Pressure Sensor, 0 bar … 250 bar, 0 psi … 3626 psi, PNP/NPN (6079242)
$641.78 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB250SG1NSDNMA0Z Pressure Sensor, 0 bar … 250 bar, 0 psi … 3626 psi, PNP/NPN + 4 mA … 20 mA (6079243)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB250SG1NSDQ5A0Z Pressure Sensor, 0 bar … 250 bar, 0 psi … 3626 psi, PNP/NPN + 4 mA … 20 mA (6079244)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB400SG1NSDLMA0Z Pressure Sensor, 0 bar … 400 bar, 0 psi … 5802 psi, PNP/NPN (6079245)
$641.78 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB400SG1NSDNMA0Z Pressure Sensor, 0 bar … 400 bar, 0 psi … 5802 psi, PNP/NPN + 4 mA … 20 mA (6079246)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB400SG1NSDQ5A0Z Pressure Sensor, 0 bar … 400 bar, 0 psi … 5802 psi, PNP/NPN + 4 mA … 20 mA (6079247)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB600SG1NSDLMA0Z Pressure Sensor, 0 bar … 600 bar, 0 psi … 8702 psi, PNP/NPN (6079248)
$641.78 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB600SG1NSDNMA0Z Pressure Sensor, 0 bar … 600 bar, 0 psi … 8702 psi, PNP/NPN + 4 mA … 20 mA (6079249)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
PBS2-RB600SG1NSDQ5A0Z Pressure Sensor, 0 bar … 600 bar, 0 psi … 8702 psi, PNP/NPN + 4 mA … 20 mA (6079250)
$781.66 inc. GSTAvailable on backorder
The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored. • Switchable switching outputs (PNP/NPN) and analog output (current/voltage) • Scalable analog output (5:1 turn down) • High measurement accuracy: ± 0.5% • IO-Link for transmitting process data to the control as measured values in bar • Housing can be twisted in two places (process connection/display) and display can be rotated by 180° • Common process connections, also with flush-mounted membrane Features • Low storage costs, short delivery times, low number of variants • Reduced installation time since housing and display can be rotated at two points • Rugged design: stainless steel measuring cell • No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar • Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance • Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges) -
LFH-EB010G1AF15SV0 Pressure Sensor, 0 Bar … 10 Bar, -10 °C … +85 °C, 4 mA … 20 mA, 2-Wire, 15M FEP Cable 6080234
$2,186.59 inc. GSTAvailable on backorder
The LFH level probe is a rugged pressure transmitter for continuous level measurement. The liquid column above the probe creates a hydrostatic pressure which is a direct indicator for the liquid level. Through its permanently connecting cable, the LFH is submerged into the liquid. The precise measurement technology is integrated in a rugged stainless steel housing. To meet diverse requirements, the LFH level probe is available in two variants, standard and enhanced. For the enhanced variant there are a number of options available that extend the range of applications significantly. They include a maximum cable length of 250 m (standard design: 100 m), integrated temperature measurement, surge protection, and a connecting cable with highly resistant FEP sheathing (up to 100 m). At a glance • Immersion depth up to 100 m • Available with various cable lengths • Measuring ranges from 0.1 bar ... 1 bar up to 0 bar ... 25 bar • Stainless steel membrane • Hermetically sealed stainless-steel housing with PA protective cap • Cable made from PUR, FEP cable is available as an option for aggressive media • Optional temperature measurement with integrated Pt100 element • Optional surge protection -
LFH-EB010G1AF1HSV0 Pressure Sensor, 0 Bar … 10 Bar, -10 °C … +85 °C, 4 mA … 20 mA, 2-Wire, 10M FEP Cable 6047979
$3,828.08 inc. GSTAvailable on backorder
The LFH level probe is a rugged pressure transmitter for continuous level measurement. The liquid column above the probe creates a hydrostatic pressure which is a direct indicator for the liquid level. Through its permanently connecting cable, the LFH is submerged into the liquid. The precise measurement technology is integrated in a rugged stainless steel housing. To meet diverse requirements, the LFH level probe is available in two variants, standard and enhanced. For the enhanced variant there are a number of options available that extend the range of applications significantly. They include a maximum cable length of 250 m (standard design: 100 m), integrated temperature measurement, surge protection, and a connecting cable with highly resistant FEP sheathing (up to 100 m). At a glance • Immersion depth up to 100 m • Available with various cable lengths • Measuring ranges from 0.1 bar ... 1 bar up to 0 bar ... 25 bar • Stainless steel membrane • Hermetically sealed stainless-steel housing with PA protective cap • Cable made from PUR, FEP cable is available as an option for aggressive media • Optional temperature measurement with integrated Pt100 element • Optional surge protection -
LFH-EB010G1AF50SV0 Pressure Sensor, 0 Bar … 10 Bar, -10 °C … +85 °C, 4 mA … 20 mA, 2-Wire, 50M FEP Cable 6078082
$2,857.17 inc. GSTAvailable on backorder
The LFH level probe is a rugged pressure transmitter for continuous level measurement. The liquid column above the probe creates a hydrostatic pressure which is a direct indicator for the liquid level. Through its permanently connecting cable, the LFH is submerged into the liquid. The precise measurement technology is integrated in a rugged stainless steel housing. To meet diverse requirements, the LFH level probe is available in two variants, standard and enhanced. For the enhanced variant there are a number of options available that extend the range of applications significantly. They include a maximum cable length of 250 m (standard design: 100 m), integrated temperature measurement, surge protection, and a connecting cable with highly resistant FEP sheathing (up to 100 m). At a glance • Immersion depth up to 100 m • Available with various cable lengths • Measuring ranges from 0.1 bar ... 1 bar up to 0 bar ... 25 bar • Stainless steel membrane • Hermetically sealed stainless-steel housing with PA protective cap • Cable made from PUR, FEP cable is available as an option for aggressive media • Optional temperature measurement with integrated Pt100 element • Optional surge protection
Pressure Sensors in Industrial Applications
Pressure sensors facilitate the detection of leaks, regulate fluid flow, and prevent overpressure conditions, ensuring the safety of both people and other industrial equipment. Their versatility and reliability make them vital tools for enhancing productivity, minimising downtime, and adhering to strict industry standards. From monitoring hydraulic systems to controlling industrial processes, pressure sensors ensure the seamless operation of industrial infrastructure Australia wide.
LFH Pressure Sensors
LFH pressure sensors are renowned for their accuracy and durability, offering reliable measurements even in harsh operating conditions. They play a critical role in ensuring the safety and efficiency of industrial processes by providing real-time data on pressure variations, enabling operators to monitor system integrity, detect leaks, and prevent overpressure situations.
SPAN Pressure Sensors
Span pressure sensors, on the other hand, excel in applications where a wide pressure range needs to be monitored with high accuracy. Their versatility allows them to adapt to varying pressure levels, making them ideal for industries such as automotive, aerospace, and manufacturing.
PBS Plus Pressure Sensors
PBS Plus pressure sensors are specifically designed to meet the demanding requirements of high-pressure applications, offering exceptional performance and reliability in extreme environments. These sensors play a crucial role in industries such as oil and gas, where pressures can reach extreme levels.
Why Choose Aventum for Your Industrial Pressure Sensors
Aventum stands out in the field of pressure measurement by offering high-quality pressure sensors designed for precision, reliability, and durability. Their products are engineered with advanced technology to perform consistently in extreme conditions, including high temperatures, pressures, and corrosive environments. Aventum’s dedication to customisation means they can provide tailored solutions to meet the specific needs of any industrial application, enhancing both efficiency and safety. For any questions on our industrial instruments or other industrial supplies, please contact us today!