Level Switches & Level Sensors
Accurate and high performing industrial components are crucial in ensuring efficiency, safety, and productivity in industrial liquid and solid processing. Level switches and level sensors are no exception to this rule, offering the ability to accurately monitor, maintain, and measure liquid and solid levels in containers, tanks, silos, and other processing vessels. If you need reliable and effective industrial instruments such as level switches and sensors, browse Aventum’s range of industrial supplies online.
-
LFP0450-A4NMB Level Sensor, Rod Probe, 450 m Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1068468)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0250-A4NMB Level Sensor, Rod Probe, 250mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1071554)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0580-A4NMB Level Sensor, Rod Probe, 580mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1071874)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1000-A4NMBL Level Sensor, Rod Probe, 1,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1073549)
$2,046.72 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP2000-A4NMBL Level Sensor, Rod Probe, 2,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1073550)
$2,046.72 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0380-A5NMC Level Sensor, Rod Probe, 380mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1084561)
$983.25 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0540-A4NMB Level Sensor, Rod Probe, 540mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1085083)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0420-A4NMB Level Sensor, Rod Probe, 420mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1086580)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0270-A4NMB Level Sensor, Rod Probe, 270mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1091235)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0530-A4NMB Level Sensor, Rod Probe, 530mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1093544)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0240-A4NMB Level Sensor, Rod Probe, 240mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1094591)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0950-A5NMC Level Sensor, Rod Probe, 950mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1097755)
$981.19 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0210-A5NMC Level Sensor, Rod Probe, 210mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1101367)
$979.13 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0470-A4NMB Level Sensor, Rod Probe, 470mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1108282)
$896.85 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0440-A4NMB Level Sensor, Rod Probe, 440mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1108283)
$896.85 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0650-A5NMC Level Sensor, Rod Probe, 650mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1109255)
$1,028.50 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0870-A4NMB Level Sensor, Rod Probe, 870mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1109639)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0530-A5NMC Level Sensor, Rod Probe, 530mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1109739)
$1,044.96 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFC-XXSGTM Capacitive Level Switch, G1/2, PNP/NPN, M12 4 Pin Male Connector (6073811)
$374.37 inc. GSTAvailable on backorder
The LFC capacitive level switch is a flexible, simple and, above all, cost-effective solution for point level measurement in fluid media. When measuring containers or for dry-run protection in piping, the LFC features particularly high performance thanks to its simple installation, very easy cleaning, compact design and long service life. Due to the EHEDG- and 3-A-certified hygienic design and a process temperature of up to 135 °C, it is also perfectly suited for CIP and SIP applications. The LFC can easily display or blank foam and deposits. • Capacitive level switch based on electrical impedance spectroscopy • Plug and play: preset to watery media • Process temperature: −20 °C ... +100 °C (+135 °C for 1 h) • Process pressure: −1 bar ... +25 bar • Two digital PNP outputs with IO-Link 1.1 • Enclosure ratings IP66, IP67 and IP69 • Ideal for hygienic applications (easy to clean, EHEDG, 3A, EG1935/2004, FDA, CIP- and SIP-capable, hygienic adapter available) Features • Maintenance-free point level measurement saves time and money • Quick, easy and cost-effective installation • Short cleaning cycles thanks to easy-to-clean sensor design • Optimal hygienic design minimizes the contamination risk • Easy plug and play sensor for quick commissioning • Ideal price-performance ratio: High accuracy at an attractive price -
LFC-XXSNTM Capacitive Level Switch, 1/2 NPT, PNP/NPN, M12 4 Pin Male Connector (6073812)
$374.37 inc. GSTAvailable on backorder
The LFC capacitive level switch is a flexible, simple and, above all, cost-effective solution for point level measurement in fluid media. When measuring containers or for dry-run protection in piping, the LFC features particularly high performance thanks to its simple installation, very easy cleaning, compact design and long service life. Due to the EHEDG- and 3-A-certified hygienic design and a process temperature of up to 135 °C, it is also perfectly suited for CIP and SIP applications. The LFC can easily display or blank foam and deposits. • Capacitive level switch based on electrical impedance spectroscopy • Plug and play: preset to watery media • Process temperature: −20 °C ... +100 °C (+135 °C for 1 h) • Process pressure: −1 bar ... +25 bar • Two digital PNP outputs with IO-Link 1.1 • Enclosure ratings IP66, IP67 and IP69 • Ideal for hygienic applications (easy to clean, EHEDG, 3A, EG1935/2004, FDA, CIP- and SIP-capable, hygienic adapter available) Features • Maintenance-free point level measurement saves time and money • Quick, easy and cost-effective installation • Short cleaning cycles thanks to easy-to-clean sensor design • Optimal hygienic design minimizes the contamination risk • Easy plug and play sensor for quick commissioning • Ideal price-performance ratio: High accuracy at an attractive price
Level Sensors
Aventum’s level sensors are used to monitor, maintain, and measure product levels while undergoing industrial processing. Level sensors detect product levels, then convert the height into electronic signals which are sent to other devices in the processing system in order to maintain the desired levels. These sensors can mostly be found in manufacturing and automotive applications, but are also commonplace in household appliances such as ice makers. Our level sensors are available in point and continuous variations, as well as in invasive and non contact options. With robust engineering, a range of sizes and process connections available, as well as suitability for a high range of temperatures, regardless of your processing needs, we have an option to suit.
Level Switches
Level switches, similar to level sensors, serve to measure and maintain liquid and solid levels during industrial processing, however there is a slight difference between the two. Level switches determine whether the level has reached a certain predetermined point in its container, usually a critically low or high level. The switch then communicates with other elements of the processor, such as actuators, to stop the unwanted emptying or overflow of a processing vessel such as a silo. Our range of level switches are robust and constructed to last, and also include contact and non-contact options allowing you to have complete control over your processing systems.
Vibrating Level Switch
Vibrating level switches are widely used due to their robustness and ability to function in challenging conditions, such as those involving high temperatures, pressures, and corrosive environments. Their ease of installation, minimal maintenance requirements, and high accuracy make them an excellent choice for ensuring safe and efficient operations in a wide range of industrial processes.
Why Choose Aventum for Your Level Switches & Sensors
Choosing Aventum for your level switches and sensors ensures that you receive industry-leading solutions designed for precision, reliability, and durability. Aventum offers a comprehensive range of level detection and measurement technologies tailored to meet the diverse needs of various industrial applications. Their products are engineered to withstand harsh conditions, including extreme temperatures, pressures, and corrosive environments, ensuring consistent performance and long-term reliability.
Your Trusted Supplier of Industrial Instrumentation
If you have any questions, feel free to get in touch with our friendly and knowledgeable team on 03 5221 4300 or drop into your closest location – Bendigo, Ballarat, or Geelong.