-
LFP0200-G1CMBL Level Sensor, G¾ A, 200mm Long Probe, w/ Remote Amplifier, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1107831
$3,427.17 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.70 -
LFP0200-G1DMB Level Sensor, G¾ A, 200mm Long Probe, w/ Remote Amplifier, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1078863
$2,499.26 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.75 -
LFP0200-G1NMB Level Sensor, G¾ A, 200mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1060307
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.84 -
LFP0200-G7BMC Level Sensor, G¾ A, 200mm Long Probe, w/ Remote Amplifier, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 8-Pin Round Connector, w/ Closed Cover 1114369
$2,645.30 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.14 -
LFP0210-G1NMB Level Sensor, G¾ A, 210mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1101368
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.106 -
LFP0225-G1NMB Level Sensor, G¾ A, 225mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1056116
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.135 -
LFP0230-G1NMB Level Sensor, G¾ A, 230mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1055769
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.136 -
LFP0240-G1NMB Level Sensor, G¾ A, 240mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1094257
$1,978.83 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.86 -
LFP0250-G6NMC Level Sensor, G¾ A, 250mm Long Probe, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 8-Pin Round Connector, w/ Viewing Window 1092136
$2,178.36 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.46 -
LFP0300-G1CMB Level Sensor, G¾ A, 300mm Long Probe, w/ Remote Amplifier, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1106120
$2,472.51 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.68 -
LFP0300-G1DMB Level Sensor, G¾ A, 300mm Long Probe, w/ Remote Amplifier, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1071124
$2,499.26 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.76 -
LFP0300-G1NMB Level Sensor, G¾ A, 300mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1053288
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.97 -
LFP0300-G2NMB Level Sensor, G¾ A, 300mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Closed Cover 1056287
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.157 -
LFP0300-G3NMB Level Sensor, G¾ A, 300mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Closed Cover 1058574
$1,929.47 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.137 -
LFP0300-G6BMC Level Sensor, G¾ A, 300mm Long Probe, w/ Remote Amplifier, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 8-Pin Round Connector, w/ Viewing Window 1087135
$2,645.30 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.19 -
LFP0300-G6NMC Level Sensor, G¾ A, 300mm Long Probe, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 8-Pin Round Connector, w/ Viewing Window 1087129
$2,178.36 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.45 -
LFP0320-G1NMB Level Sensor, G¾ A, 320mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1084965
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.105 -
LFP0330-G1NMB Level Sensor, G¾ A, 330mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1056338
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.132 -
LFP0340-G2NMB Level Sensor, G¾ A, 340mm Long Probe, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Closed Cover 1088710
$1,976.78 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.102 -
LFP0350-G1CMB Level Sensor, G¾ A, 350mm Long Probe, w/ Remote Amplifier, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA / 0 V … 10 V, M12 5-Pin Round Connector, w/ Viewing Window 1083834
$2,470.46 inc. GSTAvailable on backorder
The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units. At a glance • Level measurement in hygienic applications • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm • Process temperature up to 180 °C, process pressure up to 16 bar • CIP/SIP-resistant • High enclosure rating: IP 67 and IP 69, autoclavable • Interchangeable hygienic process connections • 3 in 1: combines display, analog output, and binary output • Remote amplifier with process connection • IO-Link 1.69